Today, 48 V phantom powering is almost universal. In phantom powering the positive voltage is fed through a pair 6k81 ohm resistors, one to each modulation lead. The matching of these resistors is often done to 0.1% to maintain common mode rejection. The negative power runs on the mic shield. XLR: Pin 1-shield; Pin 2-audio hot, +48 V; Pin 3-audio low, +48 V. Tuchel: Pin 1-audio hot, +48 V; Pin 2-shield; Pin 3-audio low, +48 V. This was standardized in the 1960s in DIN Standard 45596. //

Prior to standardization, in 1964, Schoeps produced the CMT-20 microphone which used negative 8.5 V phantom power. The CMT-200, according to Schoeps drawing SB316, dated 1964-10-14, used the same -8.5 V phantom. Later this was broadened to negative 8-12V phantom followed by the switch to positive phantom at some later point. With vintage microphones, at least from Schoeps, be very careful as they might be negative phantom.